LNG Filling Joints &LNG filling nozzle

 LNG filling joints

specification

1.Inside nominal diameter:DN25

2.Nominal pressure:PN4.0mpa

3.Medium: LNG,LO2,LN2,LAr

4.Temperature Range:-196°C~+80°C

5.PN Nominal pressure:3.75mpa

6.sealing pressure:2.75mpa

7.Rated flow:50CPM(190L/min)

8.Max outlet pressure:250Psig(1.7mpa)

9.Max working pressure:500Psig(3.45mpa)

10.Bursting pressure:1500Psig(10.35mpa)

11.Weight:3.5kg

12. Nozzle Used For Filling LNG cylinder;

13.. For LNG gas filling or receiving station;
14.Short filling time.

Main Technial Parameters of LNG Nozzles:

• Media: LNG, LN2 and other cryogenic liquid

• Rated flow: 190L/min

• Max outlet pressure: 1.7MPa

• Max working pressure: 3.5MPa

• Bursting pressure: 10.35Mpa

• Operate temperature:  -196°c-+80°c

• Injector size: 39.5mm

   

  Advantages:

• Designs ingeniously, easy operate, it can finish the LNG tank filling in 5min, even shorter;

• New seal type, the product would be more dependable, no leakage;

• It would take less time and strength to open or close it;

• It could easily to connect to or remove from the connector;

• The liquid would shut when it removed from the connector, no leakage